Sheet folders are intended for forming of selvages of sheet metal 0,5 -3,2 mm of thickness and for folding of "L" - and "П"-shaped and other rods of different functionality.

Hand-operated sheet folder is recommended to use for manufacturing different roofing accessories: smooth finial rods, ends, eaves rods, fronton rods, joining rods and other elements of a roof and facade. Hydraulic sheet folder allows to work with metal of the greater thickness, accordingly the area of its application in production is much wider.

The construction of a frame of the hand-operated machine tool allows charging material from the back party from a roll without preliminary cutting on measuring parts. Cutting the metal is possible during manufacturing a profile with the help of a cutter, which fastens on guiding located along the working surface of the machine tool. The cutting rolls of the cutter are executed from chilled steel in order to ensure safety of operation. Thus, any damages of surface of the metal are excluded.

The charged sheet is fixed with the upper clamp bar, folding is made by a moving frame rod with the help of control bars of hand-operated sheet folder. The effort affixed to the handle of the machine tool creates the moment sufficient for folding of metal 1,5 mm of thickness. The convenient scale with sectoring from 0 to 140 degrees allows to control the corner of fold. The machine tool is a mobile device and can be exploited both in shop and in outdoor conditions.

Hydraulic sheet folder is equipped with operating console, which operating system controls the corner of fold of a sheet. The powerful drive supplies effort sufficient for operation with metal with width of 3,2 mm. The heavy machine tool is recommended to maintain in-door.

The basic characteristics:
1. Type of sheet folder - hand-operated with a roller cutter;
1.1. Material of pre-form - galvanized steel, the GOST 14918 ХШ, ХП, ПК;
1.2. Maximum width of pre-form - 2550 mm;
1.3. Maximum thickness of pre-form - 1,5 mm;
1.4. Optimum thickness of pre-form - 1,2 mm;
1.5. Maximum corner of fold of pre-form per one operation - 140 0;
1.6. Exactitude of corner of fold of pre-form - +/- 1 0 ;
1.7. Dimensions of the equipment - 3250 х 870 х 650 mm;
1.8. Weight of the equipment - 800 kg.

2. Type of sheet folder - hydraulic;
2.1. Material of pre-form - galvanized steel the GOST 14918 ХШ , ХП , ПК ;
2.2. Maximum width of pre-form - 2440 mm;
2.3. Maximum thickness of pre-form - 3,2 mm;
2.4. Maximum corner of fold of pre-form per one operation - 125 0 ;
2.5. Exactitude of corner of fold of pre-form - +/- 1 0 ;
2.6. Dimensions of the equipment - 3429 х 1016 х 1651 mm;
2.7. Weight of the equipment - 2630 kg.